インストール

Ryzn Rob Run: setup & troubleshooting

Prepare Windows and your firmware, redeem your key, let the RYZN loader prepare a USB boot drive and start Ryzn Rob Run in-game - plus fixes for the most common problems.

約9分で読めます2026年11月21日に更新

Ryzn Rob Run loads in two runs: the RYZN loader first prepares a USB drive and boots your PC from it, then you open the loader a second time and start the menu in-game. Do the PC preparation first, in the order below. This guide follows the vendor's official documentation.

Before you start

  • Your license key - it is in your order confirmation email and under your orders.
  • Windows 10 or 11 (64-bit) on an Intel or AMD PC.
  • A USB drive you can erase. The loader formats it - copy anything you need off it first. Unplug other USB drives so you can't pick the wrong one.
  • Your BitLocker recovery key on another device (phone, printout, Microsoft account), if BitLocker or Device Encryption is on. Changing firmware settings can make Windows ask for it.
  • A current backup of anything important on the PC, and all work saved - you will restart several times.

Keep your recovery key private

Never put your BitLocker recovery key, license key or passwords in a screenshot or a support ticket.

Prepare your PC

Most checks use System Information. Press Win + R, type the command below and press Enter, then select System Summary on the left:

text
msinfo32
4ステップ中0ステップ完了
  1. ステップ1: Turn Secure Boot off

    In System Summary, check Secure Boot State. If it already says Off, go to the next step.

    Otherwise, on Windows 11 open Settings → System → Recovery → Advanced startup → Restart now, then Troubleshoot → Advanced options → UEFI Firmware Settings → Restart. Find Secure Boot (usually under Boot or Security), set it to Disabled, save and restart. Check that Secure Boot State now reads Off.

    ヒント:

    "Unsupported" is not the same as Off on a working UEFI setup - check the BIOS mode in the next step and your PC maker's documentation.

    注意:

    Only switch Secure Boot off. Don't clear the Secure Boot keys, reset the TPM or change the boot mode. If the option is missing or locked, contact support before changing anything else.

  2. ステップ2: Check that Windows boots in UEFI mode

    In System Summary, the BIOS Mode row must say UEFI. If it does, continue.

    注意:

    If it says Legacy, don't just turn off CSM or switch the boot mode in the firmware - Windows may stop booting. A Legacy install needs its disk converted to GPT or Windows reinstalled in UEFI mode first (see "BIOS Mode says Legacy" under Troubleshooting). If you are unsure, contact support first.

  3. ステップ3: Enable hardware virtualization

    In System Summary, Hyper-V - Virtualization Enabled in Firmware should say Yes. If that row is missing, open Task Manager (Ctrl + Shift + Esc) → Performance → CPU and check that Virtualization reads Enabled.

    If it is off, open your UEFI firmware settings (Advanced mode) and enable it:

    AMD: SVM Mode or AMD-V, usually under the CPU settings.

    Intel: Intel Virtualization Technology or VT-x.

    Save, restart and check Task Manager again.

    ヒント:

    This is a processor setting in the firmware. You don't need to install a virtual machine, turn on Hyper-V or change Memory Integrity.

  4. ステップ4: Turn off Fast Startup and hibernation

    Open Control Panel → Hardware and Sound → Power Options → Choose what the power buttons do → Change settings that are currently unavailable, untick Turn on fast startup and click Save changes.

    Then right-click Start, open Terminal (Admin) and run the command below. It turns hibernation off (and with it Fast Startup). Restart Windows afterwards.

    ヒント:

    If the Fast Startup checkbox isn't there, hibernation is probably already off - run the command anyway. The BIOS setting called Fast Boot is something else; leave it as it is.

powershell
powercfg /h off
2ステップ中0ステップ完了
  1. ステップ5: Install the Microsoft runtimes

    Install the Visual C++ Redistributable (x64) and the DirectX End-User Runtime. If they are already installed, the installer offers Repair or says a newer version exists - that's fine. Restart if asked.

    注意:

    Use only Microsoft's installers - never download single DLL files from other websites.

  2. ステップ6: If Windows Defender blocks the loader

    Open Windows Security → Virus & threat protection → Protection history and note the detection name and file. Contact support before restoring or running the file - only use the loader from your RYZN dashboard.

    If the exact file is confirmed as a false positive, you can add an exclusion for that file only: Virus & threat protection settings → Manage settings → Exclusions → Add or remove exclusions → Add an exclusion → File.

    注意:

    Keep Defender and Tamper Protection on. Never exclude whole drives, your Downloads folder, file types or all .exe files. Remove the exclusion when you no longer need it - a new loader version must be checked again.

Redeem your key and download the loader

3ステップ中0ステップ完了
  1. ステップ7: Redeem your key on your RYZN account

    Sign in (or create an account) at ryzn.cc and redeem the key from your order. Make sure you are on the account you want to use - the license is tied to it once redeemed.

  2. ステップ8: Download the loader from the dashboard

    Open your RYZN dashboard and use the loader download there. If an archive password is shown next to the download, keep it at hand.

  3. ステップ9: Extract the whole archive

    Extract the complete archive into a normal folder before you open the loader.

    注意:

    Don't start the loader from inside the archive preview - extract everything first.

Prepare the USB drive

The selected USB drive is erased

Back up the drive first and check its name and size in the loader. If you aren't sure which drive is which, unplug all other removable drives.

4ステップ中0ステップ完了
  1. ステップ10: Close the game and connect the USB drive

    Save your work, close Rob Run and plug in the USB drive you want to use.

  2. ステップ11: Load Rob Run in the loader

    Open the extracted loader and load Rob Run.

  3. ステップ12: Confirm the drive and the format

    The loader asks whether to use the USB drive it found - confirm only when it is the right one. Then it asks to format the drive - confirm only if its contents are backed up or no longer needed.

  4. ステップ13: Let the loader write the files

    The loader writes the UEFI boot module to the drive. Keep the USB connected and don't interrupt it.

Boot from the USB

When the drive is ready, the loader restarts the PC and boots from the USB drive. Leave the drive connected and let the boot finish until you are back in Windows.

USB boot failed?

If the PC doesn't boot from the USB, shows an error, or Windows starts without the module step finishing, stop here - don't assume the module is loaded. Contact support with your order number and the exact message you saw.

Start the menu in-game

2ステップ中0ステップ完了
  1. ステップ14: Start Rob Run

    Back in Windows, after the USB boot step has completed, start Rob Run.

  2. ステップ15: Open the loader a second time

    Open the loader again and start the product while you are in-game. This second run uses the module that was loaded during the USB boot.

    ヒント:

    Two separate runs: the first prepares the USB and loads the module at boot, the second starts the menu in-game. Always finish the USB boot before the in-game start.

Troubleshooting

The download or the extraction fails

Download a fresh copy from your RYZN dashboard and make sure the download has finished. Extract the whole archive and use the password shown next to the download when it asks for one.

A DLL or runtime is missing

Install or repair the Visual C++ (x64) and DirectX runtimes from the links above, restart if asked and try again. Don't download single DLL files from other websites.

My antivirus shows a warning (Kaspersky, Avast, ...)

Write down the detection name and the file, then contact support before you change your protection. Closing Kaspersky, Avast or a similar program's window doesn't unload its background driver. If a compatibility problem is confirmed, uninstall that program with its publisher's removal instructions and restart.

FACEIT conflicts with the loader

FACEIT Anti-Cheat can conflict with the module. If support confirms it as the cause, uninstall it from the installed-apps list (Win + R → appwiz.cpl, which only opens Programs and Features) and restart.

A firmware option (Secure Boot, virtualization, UEFI settings) is missing

Firmware menus differ between manufacturers - check the manual for your exact PC or motherboard model. Still stuck? Send support your PC or motherboard model, Windows version, BIOS Mode, Secure Boot State, virtualization status and the exact message you see.

BIOS Mode says Legacy

Don't change the boot mode on its own. With a current backup and your BitLocker key at hand, run mbr2gpt /validate /allowFullOS in an administrator terminal - it only checks whether the system disk can be converted to GPT and changes nothing. If validation fails, stop - never delete partitions to make it pass. Microsoft's MBR2GPT guide covers the conversion; the alternative is a clean Windows install in UEFI mode from Microsoft's Windows 11 installation media on a separate USB drive (at least 8 GB). Unsure? Contact support first.

Windows asks for the BitLocker recovery key

This can happen after a firmware change. Enter your own saved recovery key - Microsoft explains where to find it. Never post the key anywhere.

The USB boot fails or Windows starts without the module step

Don't start the menu in-game - the module isn't loaded. Check that Secure Boot is off, BIOS Mode is UEFI and the USB stayed connected, then contact support with your order number and the message shown.

Still stuck? Contact support with your order number, the step you are on and the exact message you see.

Restoring your settings later

When you no longer use the menu, you can undo the changes. Turn Secure Boot back on in the firmware settings the same way you turned it off (other software, some games included, may need it). Turn hibernation back on in Terminal (Admin), then decide separately whether you want the Fast Startup checkbox ticked again:

powershell
powercfg /hibernate on

Using third-party software breaks the game's terms of service and can lead to a ban. No cheat can guarantee an account stays safe. Microsoft's references: Secure Boot, virtualization, hibernation.

このガイドは役に立ちましたか?